Analytical study of ground motion caused by seismic wave propagation across faulted rock masses          下载免费PDF全文

J.C. Li  N.N. Li  S.B. Chai  H.B. Li 《国际地质力学数值与分析法杂志》2018,42(1):95-109

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.  相似文献   

蒙自喀斯特断陷盆地边坡与盆缘的露石差异性     

蒋若涵  沈有信  赵志猛 《山地学报》2020,38(1):42-49

喀斯特露石常常占据一定比例的地表面积,且具有许多已知或未知的水文—生态功能,对于喀斯特地区的植被恢复和环境改善发挥着重要的作用。本实验运用样线法和拍照法识别喀斯特断陷盆地不同位置(盆缘和盆地边坡)露石的数量特征和外部形态特征,同时比较了两种方法测量样地岩石裸露率的精准度。结果发现:盆地边坡与盆缘的露石数量和外部特征存在显著差异,盆缘露石分布密度(0.54个·m-2)>盆地边坡(0.39个·m-2);但盆地边坡露石的长宽比大于盆缘,单体占地面积为盆缘露石的两倍,接近40%的盆地边坡露石与山体等高线平行。样线法和拍照法测量样地岩石裸露率的结果存有差异,但并不显著,且这种差异呈现出随着岩石裸露率的增加而逐渐增加的趋势,拍照测量结果具有较小的变异系数。这些结果说明了研究区露石具有较强的空间异质性,对解释地表水土运移规律和植物分布提供重要参考。拍照法能准确地测量岩石裸露率,并提供露石外部形态特征的精准数据,可以作为喀斯特样地露石调查的新方法加以推广。  相似文献   

Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献   

岩体结构面各向异性变异系数的尺寸效应研究     

洪陈杰  黄曼  夏才初  罗战友  杜时贵 《岩土力学》2020,41(6):2098-2109

岩体结构面的各向异性与尺寸效应特征对其力学性质影响较大，综合考虑两者之间的相互关系对工程岩体稳定性评价具有重要意义。全面分析不同尺度结构面的各向异性分布，提出考虑正交方向三维形貌参数的各向异性变异系数AVC3D。通过渐进覆盖法统计4组天然岩体结构面10种不同采样尺寸的各向异性变异系数及其尺寸效应规律。结果表明：各向异性变异系数均随结构面尺寸增大而减小至定值，其与结构面尺寸具有较好的负对数函数关系；通过归一化处理，各向异性变异系数与结构面尺寸呈现较好的线性函数关系，表明各向异性变异系数具有分形结构，分维数D可以实现其尺寸效应的规律统计。该方法揭示了影响结构面形貌特征方向性变化的最大有效倾角 和粗糙系数C的增长幅度会随采样尺寸增大趋于稳定的变化机制，体现了当结构面达到各向异性尺寸效应的阈值后，会呈现出稳定的各向异性规律。  相似文献   

岩石膨胀性试验注意事项探讨     

刘军  谷莉  郭程  卓慧英 《岩土工程技术》2020,(2):117-121

从室内试验的角度来探讨几类工程勘察中岩石常用膨胀性试验(自由膨胀率、膨胀力、侧向约束膨胀率、耐崩解)的注意事项,从野外取样、标准样品制取、试验操作、方法选择等方面进行了论述,力求减小试验误差,提高膨胀岩的试验水平,保证试验结果的准确性,并使膨胀岩膨胀性指标的测定方法更臻完善。  相似文献   

帕米尔高原Rushan-Pshart古特提斯洋或中特提斯洋争论的岩石地球化学证据     

徐天德  王世锋  汤文坤  姚鑫 《地质科学》2020,(1):218-233

帕米尔高原上广泛分布的加里东期火山岩,印支期火山岩与燕山期火山岩被认为是块体依次向北俯冲拼贴到欧亚板块上的产物。特别是燕山期火山岩被认为是Rushan-Pshart中特提斯洋闭合的产物。但近年来地层古生物、火山岩证据不断表明Rushan-Pshart洋闭合时间在晚三叠一早侏罗世,由此限定Rushan-Pshart古特提斯洋性质,而帕米尔高原上广泛分布的燕山期火山岩是更南部的Shyok中特提斯洋闭合的产物。目前,中国境内Rushan-Pshart缝合带属性的研究工作展开较晚,研究程度较低。我们对塔什库尔干明铁盖沟一线燕山期火山岩带展开的工作发现零星分布的印支期花岗岩。印支期花岗岩错石U・Pb年龄显示岩体侵位时间在201 Ma左右。全岩主量元素特征表明岩石为I型高钾钙碱性闪长花岗岩;稀土元素在球粒陨石标准化图解中呈轻稀土元素相对富集,重稀土元素相对亏损的右倾海鸥型。明铁盖岩体的微量元素显示大离子亲石元素明显富集,而高场强元素明显亏损。稀土微量元素特征倾向花岗岩属性为岛弧型花岗岩,Sr-Nd-Hf同位素比值特征显示岩体形成于下地壳部分熔融环境。岩体的地化特征表明岩体形成的构造环境为板块汇聚的洋壳俯冲阶段,结合区域地质特征,我们将花岗岩体归为Rushan-Pshart古特提斯洋壳俯冲消减的产物。Rushan-Pshart缝合带传统上认为是中特提斯带,近年的研究进展认为其为古特提斯缝合带,本文的工作支持这种观点。Rushan-Pshart古特提斯缝合带的确立对帕米尔高原与青藏高原主体的块体对比提供了可信的对比方案,并对青藏高原新生代陆内变形方式的争论提供了可靠的证据。  相似文献   

化学刺激法提高花岗岩类岩石裂隙渗透性的实验研究     

郭清海  何曈  庄亚芹  骆进  张灿海 《地学前缘》2020,27(1):159-169

增强型地热系统(EGS)用于通过人工形成地热储层的方法从深部低渗透性岩体中开采地热能;国际上常采用水力压裂辅以化学刺激的方法改造EGS 储层以提高其渗透率。本文以采自青海共和盆地的花岗闪长岩样品为对象,选用3种不同化学刺激剂(氢氧化钠、盐酸和土酸),在3组不同注入流速条件下开展了系统化学刺激实验。结果表明:注入盐酸和土酸后样品渗透率均有提高,且采用土酸时渗透率提高幅度明显大于盐酸;但注入氢氧化钠后,样品渗透率反而降低。在3类化学刺激剂中,土酸对长石类矿物的溶蚀能力最强,而氢氧化钠溶液对石英的溶蚀能力最强,但氢氧化钠溶液在溶解岩石样品裂隙表面矿物后极易形成非定形态二氧化硅或非定形态铝硅酸盐蚀变矿物并阻塞裂隙,反而对化学刺激效果造成负面影响。总体来看,土酸是青海共和盆地干热岩体的最佳化学刺激剂。在中等注入速度(3 mL·min^-1)条件下,土酸对岩石样品的溶蚀程度就可达到最高;在此基础上进一步降低流速,则可能使溶解组分更易从液相中沉淀而充填于样品裂隙,导致样品渗透率有所下降。  相似文献   

青海共和盆地地热资源热源机制与聚热模式   总被引：2，自引：0，他引：2  

唐显春  王贵玲  马岩  张代磊  刘忠  赵旭  程天君 《地质学报》2020,94(7):2052-2065

青海共和盆地东侧贵德扎仓热田是探讨共和盆地地热资源成因的关键地区。本文综合区域地质、岩石热物性、同位素年代学、水文地球化学和地球物理测量等方法,重点分析了共和盆地的构造背景和热源机制,深入研究了共和盆地地热能系统的关键环节。研究发现:①识别出盆地地壳15 km以下深度发育高导体,并可与新生代青藏高原东部中-下地壳发育的层状低速高导层对比;②近NW-NS向的瓦里贡左旋走滑逆冲断裂是扎仓热田重要的控热和导热断裂;③晚中生代花岗岩与上覆围岩具有显著的热导率;④温泉氢氧同位素指示水源以地表水补给为主;⑤存在浅层新生界碎屑岩中-低温热储和深层花岗岩中-高温热储,发育四层两类地热资源。综合分析提出了共和盆地干热岩三元聚热模式:即新生代中-下地壳发育的高温低速高导层是主要热源,中晚三叠世花岗岩是良好的导热和储热体,既是干热岩母岩,也是热储,新生代低热导率沉积岩是良好的盖层。研究对于青藏高原地热成因、资源预测、开发规划等具有参考意义。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

Static and dynamic conceptual model of a complexly fractured crystalline rock aquifer     

Evan Earnest  David Boutt  Larry Murdoch  William P. Clement 《水文研究》2019,33(20):2691-2710

A conceptual model of anisotropic and dynamic permeability is developed from hydrogeologic and hydromechanical characterization of a foliated, complexly fractured, crystalline rock aquifer at Gates Pond, Berlin, Massachusetts. Methods of investigation include aquifer‐pumping tests, long‐term hydrologic monitoring, fracture characterization, downhole heat‐pulse flow meter measurements, in situ extensometer testing, and earth tide analysis. A static conceptual model is developed from observations of depth‐dependent and anisotropic permeability that effectively compartmentalizes the aquifer as a function of foliation intensity. Superimposed on the static model is dynamic permeability as a function of hydraulic head in which transient bulk aquifer transmissivity is proportional to changes in hydraulic head due to hydromechanical coupling. The dynamic permeability concept is built on observations that fracture aperture changes as a function of hydraulic head, as measured during in situ extensometer testing of individual fractures, and observed changes in bulk aquifer transmissivity as determined from earth tides during seasonal changes in hydraulic head, with higher transmissivity during periods of high hydraulic head, and lower transmissivity during periods of relatively lower hydraulic head. A final conceptual model is presented that captures both the static and dynamic properties of the aquifer. The workflow presented here demonstrates development of a conceptual framework for building numerical models of complexly fractured, foliated, crystalline rock aquifers that includes both a static model to describe the spatial distribution of permeability as a function of fracture type and foliation intensity and a dynamic model that describes how hydromechanical coupling impacts permeability magnitude as a function of hydraulic head fluctuation. This model captures important geologic controls on permeability magnitude, anisotropy, and transience and therefor offers potentially more reliable history matching and forecasts of different water management strategies, such as resource evaluation, well placement, permeability prediction, and evaluating remediation strategies.  相似文献